Lucid™ Flexible LED Neon Accessories
Connectors
Our Lucid™ Flexible LED Neon Side Bend Strip Lights are compatible with a variety of connectors to facilitate their installation process.
We offer Jumper Connectors in two different lengths (1’ and 8’) which are ideal for putting two different pieces of our Lucid™ Flexible LED Neon strip lights together, or for going around columns, hallways, or obstacles. Please Note: Jumper Connectors for RGB are only available for in-field soldering. Jumper Connectors are required to connect one piece of strip light to another as the Strip-to-Power Connectors are directional and can only be used on one end of the neon strip light.
We also have Power Connector Pairs which provide safe power connections for installations outdoors. These are offered in two versions: bottom feed, which puts the wire in a perpendicular position to the strip, and end feed, with a wire that sits aligned to the strip.
Please keep in mind that the connectors we offer are compatible with a specific type of strip, so make sure to select RGB connectors if you are also purchasing the Lucid™ RGB Flexible LED Neon Side Bend Strip Lights.
All connectors include two spacers, one end cap, and one front cap.
Mounting Accessories
These lights can be installed using one of these three accessories: they can be installed using our Mounting Brackets, which will help attach the Lucid™ Flexible LED Neon Side Bend Strip Lights to a surface. Each package comes with 10 plastic mounting clips and 10 screws. The strip lights easily snap onto each clip for durable mounting.
Depending on the project, our Mounting Channels can be used for installation. Our conventional Mounting Channels are sold in 1-meter pieces, and can be mounted on practically any flat surface to give your project the finished look it deserves. They act as a heat sink, provide a barrier from dust and debris, while helping extend the life of your strip light.
As an alternative, our bendable Mounting Channel is sold in 10-meter reels. This channel acts as a “spine” to the strip light allowing you to adapt it to the same shape of the strips.
Features
- Compatible with Lucid™ Flexible LED Neon Side Bend Strip Lights
- Power connector pairs available in 24” with an end feed or a bottom feed.
- Jumper connectors available in 1’ and 8’
- Durable and compact design
- Make painless connections
- Easily jump gaps, turn corners and join two pieces together
Connector Specifications:
|
White Lucid Accessories |
|||
|
SKU |
Connector |
Wire Length |
Dimmensions |
|
LUC-S-SC-C2-10-12 |
Jumper Connector |
1 ft |
L: 11 7/8" x W: 5/8" x H: 1" (30 x 1.44 x 2.43 cm) |
|
LUC-S-SC-C2-10-96 |
Jumper Connector |
8 ft |
L: 94 1/2" x W: 5/8" x H: 1" (240 x 1.44 x 2.43 cm) |
|
LUC-S-SC-C1-10-24-E |
Power Connector Pair End Feet |
2 ft |
L: 23 5/8" x W: 1" x H: 1" (60 x 2.32 x 2.32 cm) |
|
LUC-S-SC-C1-10-24-B |
Power Connector Pair Bottom Feed |
2 ft |
L: 23 5/8" x W: 1" x H: 1" (60 x 2.32 x 2.32 cm) |
|
RGB Lucid Accessories |
|||
|
SKU |
Connector |
Wire Length |
Dimmensions |
|
LUC-S-RGB-C2-10-12 |
Jumper Connector |
1 ft |
L: 11 7/8" x W: 5/8" x H: 1" (30 x 1.44 x 2.43 cm) |
|
LUC-S-RGB-C2-10-96 |
Jumper Connector |
8 ft |
L: 94 1/2" x W: 5/8" x H: 1" (240 x 1.44 x 2.43 cm) |
|
LUC-S-RGB-C1-10-24-E |
Power Connector Pair End Feet |
2 ft |
L: 23 5/8" x W: 1" x H: 1" (60 x 2.32 x 2.32 cm) |
|
LUC-S-RGB-C1-10-24-B |
Power Connector Pair Bottom Feet |
2 ft |
L: 23 5/8" x W: 1" x H: 1" (60 x 2.32 x 2.32 cm) |
Mounting Brackets Specifications:
- Quantity per package: 10 mounting clips and screws
- Length: 1/2” (12 mm)
- Width: 9/16” (14 mm)
- Height: 5/8” (16 mm)
Mounting Channels Specifications:
- Quantity per package: One mounting channel with screws
- Length: 3 3/8” (1 m)
- Width: 1/2” (13 mm)
- Height: 5/8” (16 mm)
Side Bendable Mounting Channels Specifications:
- Quantity per package: One mounting channel with screws
- Length: 32' 10" (10 m)
- Width: 7/16” (11 mm)
- Height: 9/16” (15 mm)
Lucid™ Flexible LED Neon Side Bend Accessories FAQ:
Q: What are the advantages of these accessories?
Our Lucid™ Flexible LED Neon Strip Lights are compatible with these connectors, which allow the Neon strip lights to go around columns, hallways, or obstacles, and guarantee extremely fast and easy connections. Some of our connectors (the Power Connector Pairs) also provide safe power connections for installations outdoors, and they are available in two wire configurations so you can choose what is more convenient depending on your project. The Mounting Accessories offer different mounting options and give a finished look to all projects. The Mounting Channel also acts as a heat sink, protects the strip against debris, and contributes to an extended life.
Q: Which connector should I use to turn a corner?
You can use the Jumper Connector with either 1’ or 8’ of wire - depending on the needs of your project.
Q: Which connector should I use for a gap in my project?
You can use the Jumper Connector with either 1’ or 8’ of wire - depending on the needs of your project.
Q: Can I use my Lucid™ Flexible LED Neon Strip Lights outdoors?
Yes, your Lucid™ Flexible LED Neon Strip Lights are outdoor rated and have an IP65 rating. Please make sure all connections and other components are also IP65-rated.
Q: What is the product warranty?
Because of our unyielding confidence in the quality of our product, we offer a 7-year warranty on our Lucid™ Flexible LED Neon Strip Lights. For more info, please read our warranty policy.
