Screw Terminal Connectors
Our Screw Terminal Connectors offer a reliable and efficient solution for achieving solderless connections in your LED strip light installations. Designed for ease of use and secure connections when installing single color or two conductor LED strip lights, these small connectors fit in most aluminum channels, ensuring a robust and stable setup without the need for soldering. Make your installation process smoother and more convenient with our compact and versatile connectors.
The connectors are sold in packs of 5 pieces.
Features
- Easy to use screw terminal block connections for secure, reliable installations.
- Works with both 12V and 24V single color/two conductor LED strip lights.
- Fits most aluminum mounting channels designed for 10mm wide strips.
- Connectors with no wire (ST-2-C-10-0) can accept 22-16 wire gauges.
- Compatible with all our aluminum mounting channels designed for 10 mm wide LED strip lights.
→ Choose the Screw Terminal Connectors with no wire if you…
- Have your own wire.
- Want to connect a wire end to an LED strip.
→ Choose the Screw Terminal Jumper Connectors with no wire if you…
- Want to connect an LED strip to another strip without wire in between.
- Want to extend your run lengths for larger projects.
→ Choose the Screw Terminal Corner Connector with no wire if you…
- Want to turn corners.
Specifications
- IP Rating: IP20
- Voltage Range: 5-24V DC
- Connector Type: Terminal block
- Connectors without wire (ST-2-C-10-0) can accept 22-16 wire gauges.
- Ambient Temperature: 14°F to 104°F (-10°C to 40°C)
- Material: Polycarbonate
| SKU | Connector Type | Maximum Amperage | Dimensions | |
| Single Color Screw Terminal Solderless Connectors | ST-2-C-10-0 | Connector with no wire | 6 Amps | 13.4 x 11.6 x 6.5 mm |
| ST-2-J-10-0 | Jumper Connector | 6 Amps | 14.6 x 11.5 x 6.5 mm | |
| ST-2-CRN-10-0 | Corner Connector | 3.5 Amps | 16.3 x 11.5 x 6.5 mm |
Certifications
Compatible Products
IP20 LED Strip Lights
UltraBright™ Single Color LED Strips
- UltraBright™ Outline Series LED Strip Light
- UltraBright™ Accent Series LED Strip Light
- UltraBright™ Architectural Series LED Strip Light
- UltraBright™ Industrial Series LED Strip Light
Aluminum Mounting Channels
Extra Wire
Screw Terminal Connectors FAQ
Q: What are the advantages of solderless connectors?
- No soldering required.
- Install LED strip lights in seconds.
- Easily attach an additional strip to the run of lights.
- Easy to connect and disconnect.
Q: What is the amperage limit of the connectors?
The screw terminal connectors have an amperage limit of 6 amps except for the corner connector which can only handle 3.5 amps in total.
Q: Can I load the connectors with more than the specified amperage limit?
It is not advisable to overload the connectors as this could result in future damage to the connectors and your setup.
Q: Which connector should I use to turn a corner?
The corner screw terminal connector with no wire (ST-2-CRN-10-0) is the best solution for 90 degree turns or corners.
Q: Can I use the connector to make jumps?
Yes, you can use the connectors with no wire (ST-2-C-10-0) to jump from one strip to another by placing low voltage wire between the connectors. Depending on the series of LEDs you are working with and the length you intend to run the wire, you would need to factor in voltage drop. It is recommended to consult with a qualified electrician which wire gauge would work best for your setup. The connectors can fit 22 AWG to 16 AWG.
Q: Are these connectors a better option than soldering directly to the LED strip?
We always suggest soldering as the best option for a long term solution. Sometimes the connectors can be bumped or knocked off. In high vibration areas, it may cause the connector to come loose from the strip. Soldering is better if your soldering skills are great since the solder pads are very small and the solder joints cannot touch.
Q: What do I do If my lights are not lighting up?
1. Make sure you follow the positive (+) and negative (-) markings on the strip to indicate which colored wire will be positive and which will be assigned negative.
2. Ensure the screws are tightened all the way. If the strip slips out of the connector it is not secured all the way. Be gentle.
3. Check your power supply and make sure it is hooked up correctly. The V+ and V- markings on the LED driver are correctly aligned with the positive (+) and negative (-) markings on the LED strips.
Need assistance with your project or purchase? Our design specialists are ready to help.
Contact Us
