Static White - Hardwired Pro Victory™ LED Puck Light Kits
Our Victory™ LED Puck Light Kits come with all the basic components you need for your lighting project. Save time and labor with our hardwired pro kits by simply choosing between 4 or 6 puck lights available in two color temperatures, Warm White (3000K) and Natural White (4000K).
At 240-260 lumens per puck, these round compact fixtures are perfect for applications requiring accent or task lighting with great color rendering. Each puck light can be installed directly on a surface or recessed into cabinets or shelves. They are fully dimmable and can be daisy chained up to 7 fixtures in a continuous run.
Note: Each kit comes with a driver specifically chosen to meet the power needs of the lights included. Please refrain from adding additional lights to the kit you purchase, as the driver won't support them.
Everything You Need for a Seamless Installation
+ 
+ 
+ 
Read below for a quick guide on how to build your own LED puck light kit
01. Choose Your Color Temperature
3000K - Warm White: Great for applications with warm tones of wood that are more yellow or light brown.
4000K - Natural White: Good choice for environments with bright white and earth tone combinations that need to appear larger such as kitchens or retail spaces.
02. Choose the Number of Puck Lights
Simple Dimming at the Tip of Your Fingers!
Lutron Diva: If you just need a basic, cost-effective wall dimmer, the Lutron Diva is a great manual dimmer that is easy to install for any experienced electrical enthusiast. The large paddle switch turns the light on/off and returns to your favorite setting. The discreet slider adjusts the light's brightness level to suit any activity.
Need assistance with your project or purchase? Our design specialists are ready to help.
What Comes in the Kit?
Each of our Hardwired Pro Victory™ LED Puck Light Kits comes with:
Victory™ LED Puck Lights:
or 
Power Supply:
Control Method:
Connectors:
or 
Priceless Service:
Installation Diagrams
Installation Diagram for Hardwired Pro Kit with Lutron Diva
*To connect the LED Puck Lights to the Zurik™ Dimmable LED driver, cut off the end of the puck light input connector to expose the wires.
Specifications
Victory™ LED Puck Lights Specifications:
-
✔ 5-year warranty
-
✔ 12V DC constant voltage input
-
✔ ETL Listed
-
✔ IP20-rated
-
✔ High CRI LED puck lights
-
✔ Fully dimmable
-
✔ 120 degree lighting beam angle
-
✔ Diameter: 2 ½”
-
✔ Height: ⅕”
-
✔ Ambient temperature: -4ºF to 104ºF (-20°C to 40°C)
-
✔ 50,000 hour lifespan (8 hours a day for 17 years)
-
✔ Single-bin LED selection to ensure color consistency (3-Step MacAdam)
|
Product SKU |
Color CCT |
Watts / Puck |
Lumens / Puck |
Luminous Efficacy |
CRI |
Gamut Score |
Relative Fidelity |
TLCI |
|
VIC-R-30K-S-12V |
3000K |
3.2 |
240 |
60 lm/W |
95 |
103 |
93 |
93 |
|
VIC-R-40K-S-12V |
4000K |
3.2 |
260 |
65 lm/W |
92 |
97 |
90 |
91 |
Specification Sheets Download:
Victory™ Puck Light Specification Sheet
Zurik® Universal Dimmable LED Driver Data Sheet
Hardwired Pro Victory™ LED Puck Light Kits FAQs:
Q: How many puck lights can I connect in a daisy chain before voltage drop?
The maximum run length in series of the Victory™ LED Puck lights is 7 pucks. In other words, you can connect up to 7 LED pucks in a continuous run before experiencing visible voltage drop. However, you may create parallel connections from a single power supply and split the runs in different directions if you need to power more than 7 LED pucks in your application.
Q: Can I add more fixtures to the Hardwired kits?
Both the four and six puck light kits include a 12V 30W Zurik Universal Dimmable LED Driver. The maximum number of pucks recommended for this power supply is 7. Therefore, if you purchase a kit that includes 4 pieces, you may add up to 3 more pucks. However, if you purchase the kit with 6 fixtures, you may only add one extra puck light. If you require a different number of puck lights for your project, please contact us to get a personalized kit.
Q: How do I install the LED puck lights?
The Victory™ LED Puck lights can be surface mounted or recessed mounted using the hardware that comes with the product. For full installation instructions, please refer to the Victory™ LED Puck Light Spec Sheet and Install Guide.
Q: Can I hardwire the puck lights?
Yes, the LED puck lights can be hardwired. Simply cut off the connectors on the LED puck lights to expose the wires and hardwire your connections. This will affect the 30-day money-back guarantee as the product must be in resellable condition in order to be eligible for return but it won’t affect the warranty of the product.
Q: What is CRI and why should I care?
Color Rendering Index (CRI) measures how colors are correctly rendered under a light source in comparison to natural sunlight. The index is measured on a 0-100 scale with 100 being a perfect rating of color accuracy, meaning the colors appear as they naturally would under unadulterated daylight. High CRI lighting is sought out everywhere. The bottom line: the higher the CRI, the higher quality the light source.
95 - 100 → Phenomenal color rendering! Colors appear as they should, subtle tones pop out and are accented, skin tones look beautiful, art comes alive, backsplashes and paint show their true colors. You have to see it to believe it!
90 - 95 → Great color rendering! Almost all colors 'pop' and are easily distinguishable. Noticeably great lighting starts at a CRI of 90.
80 - 90 → Good color rendering, where most colors are rendered well. You may not see items as fully saturated as you would like, but most people will not notice.
60 - 75 → Poor color rendering. Items and colors may look desaturated, drab, and at times unidentifiable. (For example, you may not be able to see the difference between black and navy colored socks.)
Lighting products that emit colored lights will not have a CRI as color rendering is only for white light.
Q: What are lumens?
Lumens are a quantifiable amount of light produced by an LED source. In other words, this is one way we can measure how much light is produced. When comparing LED strip lights, you want to compare the lumen output as well as the CRI, watts/foot, warranty, and bin selection.
Quick guide by project
Accent Lighting and Mood Lighting - 100 to 350 lumens per foot
Under cabinet Lighting - 175 to 525 lumens per foot
Task Lighting with low distance from light source - 280 to 437 lumens per foot
Task Lighting with higher distance from light source - 344 to 687 lumens per foot
Indirect lighting in a bedroom/ hotel / vehicle / lobby - 375 to 562 lumens per foot
Industrial lighting / signage / tube replacements - 500 to 950 lumens per foot
Q: What is the warranty of the Victory™ LED Puck Lights?
Because of our unyielding confidence in the quality of our product, we offer a 5-year warranty on our Victory™ LED Puck Lights. Please bear in mind that if you are hardwiring the puck lights, you may have to cut off the connector attached to expose the wires. Doing so will affect the 30-day money-back guarantee policy but it won’t affect the warranty of the product. For more information, please read our warranty policy.
Q: What is the importance of an ETL listing?
Electrical Testing Laboratories (ETL) is a testing and certification division that rigorously tests products to ensure safety and quality. ETL Listed products indicate that the tested product has been found in compliance with accepted national standards.
Need assistance with your project or purchase? Our design specialists are ready to help.
