Snap On Wire Connectors - 2 Wire Connector
Product information
This wire connector is used for connecting four single wires together. You do not have to expose the copper in the wire to use this product. The connector has a cutting mechanism inside and will cut and create a strong connection once it is crimped down and snapped together.
| Wire Gauge | #18- 22 AWG |
| Height | 6.65mm |
| Length | 25mm |
| Width | 10.4mm |
| Max Amperage | 9A |
| Rated Voltage | 300v |
| Peak Voltage | 2.5kV |
| Housing material | Polycarbonate |
To use this connector:
- Open the top and bottom of the connector
- Prepare wires to be inserted into both sides of the connector by cutting it flush with the wire casing. You do not need exposed copper to use this connector
- Insert wire into the connector and make sure that the wire is pushed all the way to the back of the connector (critical step)
- Once you have confirmed that the wire has been pushed all the way to the back and is lined up correctly press the connector tray down with pliers to secure the connection
If you need assistance with this product or any project, please contact our design team.
