Wireless Wall Controller and Receiver for Dynamic Tunable White Series LED Strips
Introduction
Wireless Wall Mounted Controller
Wireless wall dimming is as easy to use as it is beautiful. The wall plate comes in a high gloss white finish. The minimalistic appearance makes the remote perfect in any design environment. With a dimming range of 0.1% - 100% you can control the brightness of your LED strip lights to create a perfect flicker-free setting. The wireless wall dimmer works with radio frequency (RF) and can dim the LEDs within 100ft of the receiver. Since it is wireless, it can be installed into any wall or cabinet and easily fits into existing North American receptacles.
Functions
- Double click the rotary knob to switch between the Brightness Mode and the Color Temperature Selection Mode
- When on the Brightness Mode
- Turn the rotary knob to the right to increase brightness
- Turn the rotary knob to the left to decrease brightness
- When on the Color Temperature Selection Mode
- Turn the rotary knob to the right to add more bright white color
- Turn the rotary knob to the left to add more warm white color
- Quickly press and release the knob to turn your lights on/off
- Press and hold down the knob button to set the color temperature to mid-range
Need assistance?
Contact us here. We have a specialized and exceedingly helpful design team standing by to help you with your project!
Wireless Wall Mounted Controller: FF-HYB-WALL-W (click for spec sheet)
Name: Wireless Desktop Dimmer for Dynamic Tunable Series
Product Dimensions: L: 4 ⅜'' x W: 3 ¼'' x D: 1 ¾''
Weight: 0.36 lbs
Dimming Type: PWM
Signal Type: RF (Radio Frequency) 868MHz
Range: 100ft from receiver
Working Temperature: -20º F to 140º F
Receiver: FF-HYB-RCVR (click for spec sheet)
Name: In-Line Receiver for Dynamic Tunable Series LED strip lights
Product Dimensions: L: 7'' x W: 1 ¾'' x D: ¾''
Weight: 0.15 lbs
Power Input: 12-36V DC
Maximum Wattage: 12V:240W or 24V:480W
Maximum Amps: 5A per channel
Number of Channels: 4
Working Temperature: -20º F to 140º F
Frequently Asked Questions
Q: Can the LED dimmer work if there are walls between the receiver and the dimmer?
Yes. Because the dimmer uses radio frequency (RF), it does not need a line-of-sight with the receiver to work. Wall density and material may affect the signal strength. (Concrete is much harder to penetrate than wood and drywall)
Q: Will the receiver remember the last brightness setting when I turn it off and on again?
Yes. The receiver and remote are paired to remember the last setting.
Q: Can I install separate receivers in other areas and run them off of one remote?
Absolutely! We call everything that runs off of one remote a 'zone'. Each zone can be controlled with an endless amount of receivers.
Q: I want 2 remotes so I do not have to move it around all the time. Can I pair more than one remote to a single receiver?
Yes. Each receiver can be controlled by 8 different remotes.
Q: I want to control 10 receivers with one remote. Can I do that?
Yes. You can control an infinite number of receivers with one remote.
Q: Can I use these remotes and receivers with RGBW or RGB Series?
No, you can only use these with the Dynamic Tunable White Series
Downloads:
Wall Mounted Controller: Wireless Wall Dimmer for Dynamic Tunable White Series Spec Sheet
Receiver: In-Line Receiver for Dynamic Tunable White Series Spec Sheet
