Zurik® Universal Dimmable LED Driver

The Zurik® Universal Driver is the ultimate power supply for flawless dimming capabilities in any type of project. Offering a wide voltage input range, it is perfectly compatible with single channel LED products. These drivers can even act as their own junction boxes and are IP66-rated for reliable, long-lasting use.

Top Features and Benefits:

Convenient and flawless performance
Available in 12V and 24V
Perfect compatibility with single channel LED strip lights and light bars
Dims perfectly with a variety of dimming technologies like 0-10, 1-10, MLV, ELV, TRIAC and more.
Flicker-free lighting and high power efficiency
Durable device made with lightweight design
IP66 rated to withstand dry, wet and damp locations

Zurik Universal Dimmable Driver LED Strip

Applications:

Shopping malls
Commercial accent lighting
Hotel lighting
Restaurant lighting
Bar and lounge lighting
Residential applications
Commercial signs and billboards

Compatible Products

LED lighting

Dimmers

Specifications

Voltage Tolerance: 0.5V
Voltage Regulation: 0.5%
Dimming Range: 0-100%
Deration Recommendation: 80%
Minimum Load: 10%
Frequency Range: 47-63 Hz
THD (Typ.): <20%
Short Circuit: Shuts down output voltage. Re-powers on to recover after the fault condition is removed.
Overloading: ≤120%
Overheating: 212ºF ∓ 18ºF (100ºC ∓ 10ºC) Driver shuts down when these limits are exceeded. An automatic reset will occur after the temperature falls back within acceptable limits.
Working Temperature: -40ºF ~ 140ºF (-40ºC ~ 60ºC)
Working Humidity: 20 ~ 90%RH. Non Condensing
Storage Temp and Humidity: -40ºF ~ 176ºF (-40ºC ~ 80ºC), 10 ~ 95%RH
Temp Coefficient: ∓0.03%/ºC [32ºF ~ 122ºF (0 ~ 50ºC)]
Certifications: UL (E500166) Listed, cUL Listed, RoHS Certified, Conform FCC, Conforms CAN/CSA-C22. 2 NO.250 13 SELV
Maximum Voltage: I/P-O/P:1.88KVAC
Isolation Resistance: I/P-O/P:100MΩ/500VDC/25ºC/70%RH
EMC Emission: FCC Part 15B
PWM Frequency: 400Hz
Ingress Protection: IP66
Warranty: 7 years

12V Output Specifications

	ZRK-UNV-30W-12VDC	ZRK-UNV-60W-12VDC	ZRK-UNV-120W-12VDC	ZRK-UNV-300W-12VDC	ZRK-UNV-C300W-12VDC
Input Voltage	100-277V	100-277V	100-277V	110-277V	100-277V
Rated Current	2.5A	5A	10A	25A	5*5A
Rated Power	30W	60W	120W	300W	300W
Load Regulation	±1%	±1%	±2%	±2%	±1%
Class 2 Rating	Yes	Yes	No	No	Yes
Efficiency (Typ.)	Up to 80%	Up to 85%	Up to 84%	Up to 92%	Up to 91%
AC Current (Max)	0.5A@100VAC	0.5A@100VAC	1.7A@100VAC	3.4A@100VAC	3.6A@100VAC
Weight	2.09 lbs (0.95 Kg)	1.85 lbs (0.84 Kg)	3.02 lbs (1.37 Kg)	4.85 lbs (2.2 Kg)	5.51 lbs (2.5 Kg)
Inrush Current (Typ.)	7A, 50%, 420us, @120VAC 12A, 50%, 480us @277VAC	14A, 50%, 780us, @120VAC 15A, 50%, 660us @277VAC	20A, 50%, 1.6ms, @120VAC 25A, 50%, 1.2ms @277VAC	20A, 50%, 1.9ms, @120VAC 35A, 50%, 1.9ms @277VAC	35A, 50%, 960us, @120VAC 43A, 50%, 1ms @277VAC
Power Factor	0.99@120VAC 0.98@277VAC	0.98@120VAC 0.95@277VAC	0.99@120VAC 0.96@277VAC	0.99@120VAC 0.97@277VAC	0.99@120VAC 0.95@277VAC
Dimensions	L:6 1/2" W:3 3/4" H:1 5/8" (16.5 cm x 9.5 cm x 4 cm)	L:7 1/2" W:3 3/4" H:1 5/8" (18.8 cm x 9.5 cm x 4 cm)	L:8 3/4" W:3 3/4" H:1 5/8" (22 cm x 9.5 cm x 4 cm)	L: 11" W:4 3/8" H:1 7/8" (27.8 cm x 11 cm x 4.5 cm)	L: 11 7/8" W:4 3/8" H:1 7/8" (30.1 cm x 11 cm x 4.5 cm)

24V Output Specifications

	ZRK-UNV-30W-24VDC	ZRK-UNV-60W-24VDC	ZRK-UNV-96W-24VDC	ZRK-UNV-120W-24VDC	ZRK-UNV-200W-24VDC	ZRK-UNV-300W-24VDC	ZRK-UNV-C192W-24VDC	ZRK-UNV-C384W-24VDC	ZRK-UNV-600W-24VDC
Input Voltage	100-277V	100-277V	100-277V	100-277V	110-277V	110-277V	100-277V	100-277V	110-277V
Rated Current	1.25A	2.5A	4A	5A	8.33A	12.5A	2*4A	4*4A	2*12.5A
Rated Power	30W	60W	96W	120W	200W	300W	192W	384W	600W
Load Regulation	±1%	±1%	±1%	±1%	±1%	±1%	±1%	±1%	±1%
Class 2 Rating	Yes	Yes	Yes	No	No	No	Yes	Yes	No
Efficiency (Typ.)	Up to 80%	Up to 85%	Up to 86%	Up to 84%	Up to 88%	Up to 92%	Up to 89%	Up to 91%	Up to 94%
AC Current (Max)	0.5A@100VAC	0.5A@100VAC	1.3A@100VAC	1.7A@100VAC	2.3A@100VAC	3.4A@100VAC	2.3A@100VAC	4.6A@100VAC	6A@110VAC
Weight	2.09 lbs (0.95 Kg)	1.85 lbs (0.84 Kg)	3.02 lbs (1.37 Kg)	3.02 lbs (1.37 Kg)	4.17 lbs (1.89 Kg)	4.85 lbs (2.2 Kg)	5.07 lb (2.3 Kg)	5.73 lbs (2.6 Kg)	6.27 lbs (2.84 kg)
Inrush Current (Typ.)	7A, 50%, 420us, @120VAC 12A, 50%, 480ms @277VAC	14A, 50%, 1.9ms, @120VAC 15A, 50%, 1.9ms @277VAC	20A, 50%, 1.6ms, @120VAC	20A, 50%, 1.6ms, @120VAC 25A, 50%, 1.2ms @277VAC	15A, 50%, 1.4ms, @120VAC 30A, 50%, 1.4ms @277VAC	20A, 50%, 1.9ms, @120VAC 35A, 50%, 1.9ms @277VAC	19A, 50%, 1.3ms, @120VAC 38A, 50%, 960us @277VAC	22 8A, 50%, 960us, @120VAC	52A810us, @50%,110VAC 76A,148us @50%, @277VAC
Power Factor	0.99@120VAC 0.95@277VAC	0.98@120VAC 0.95@277VAC	0.98@120VAC 0.95@277VAC	0.98@120VAC 0.95@277VAC	0.98@120VAC 0.95@277VAC	0.99@120VAC 0.95@277VAC	0.99@120VAC 0.94@277VAC	0.98@120VAC 0.96@277VAC	0.95@110VAC 0.93@277VAC
Dimensions	L:6 1/2" W:3 3/4" H:1 5/8" (18.8 cm x 9.5 cm x 4 cm)	L:7 1/2" W:3 3/4" H:1 5/8" (18.8 cm x 9.5 cm x 4 cm)	L:8 3/4" W:3 3/4" H:1 5/8" (22 cm x 9.5 cm x 4 cm)	L:8 3/4" W:3 3/4" H:1 5/8" (22 cm x 9.5 cm x 4 cm)	L:10 1/4" W:4 1/4" H:1 7/8" (26 cm x 10.5 cm x 4.5 cm)	L: 11" W:4 3/8" H:1 7/8" (27.8 cm x 11 cm x 4.5 cm)	L: 11" W:4 3/8" H:1 7/8" (27.8 cm x 11 cm x 4.5 cm)	L: 12 7/8" W:5 5/8" H:2" (32.5 cm x 14 cm x 4.8 cm)	L: 12 3/16" W:5 1/2" H:1 7/8" (32.5 cm x 14.4 cm x 4.8 cm)

CAUTION: Do not wire multiple taps together. The multitap versions of this driver should be treated as multiple independent drivers inside of one unit, so please do not wire them together to avoid stacking voltage.

Wiring Diagram Using 0-10/1-10V Dimming

Wiring Diagram Zurik Universal LED Dimmable Driver with 0-10V Wall Dimmer

Wiring Diagram Using TRIAC/ Phase Cut Dimming

Wiring Diagram Zurik Universal LED Dimmable Driver with 120V AC Wall Dimmer

Frequently Asked Questions

What are the main differences between the Zurik® EMLV Drivers and the Zurik® Universal Drivers?

In terms of performance there are not many differences: they both have a very high power factor that makes them very efficient, and they both have a wide input voltage range (100-277 VAC (110-277 VAC for the 200W and 300W versions). However, the main advantage of the Zurik® Universal Drivers is that it has all the functionalities of the EMLV Driver (so it’s compatible with MLV, ELV and TRIAC dimmers), but it also offers other dimming functionalities such as 0-10V and 1-10V dimming, Potentiometer, and 10V PWM dimming.

Can I wire together multiple outputs on the multi-tap versions of this driver?

No, please do not wire multiple taps together. The multiple taps on this driver should be considered as independent drivers in one unit, so please avoid that.

What is a Class 2 driver?

An LED driver that is listed as Class 2 complies with UL standard UL1310, thus indicating that its energy output is safe to touch with no major safety protection required. Some models of our Zurik® Universal Dimmable LED Driver are listed as Class 2, and they will minimize risk of fire or electrical shock at the LED strip level when operating at under 60W for 12V systems or under 100W for 24V systems per the National Electrical Code. This limits the amount of LED strip lights that you can run from a single driver, but some of our Class 2 Zurik® Universal Dimmable LED Drivers are multi-output drivers, that allow you to power a larger amount of LED strip lights from a single driver -up to 384W in some cases, all while complying with Class 2 standards.

The following models are Class 2:

ZRK-UNV-30W-12VDC
ZRK-UNV-30W-24VDC
ZRK-UNV-60W-12VDC
ZRK-UNV-60W-24VDC
ZRK-UNV-96W-24VDC
ZRK-UNV-C300W-12VDC (Multi-output)
ZRK-UNV-C192W-24VDC (Multi-output)
ZRK-UNV-C384W-24VDC (Multi-output)

What do all those new dimming options mean?

0/1-10V dimming means that you can use a dimmer to alter the control signal of the dimming wires and change the brightness. There are two Dim lines on this type of drivers (Dim (+) and Dim (-)), and they carry a 10V signal that directly controls brightness. 0-10V dimming go from 5% to 100% brightness, while 1-10V dimmers go from 10% to 100%.

On the other hand, a potentiometer dimming mechanism refers to using a 100K Ohm potentiometer, which is a resistor that is attached to the dimming wire, and it’s a cost-effective, no-frills solution. Last but not least, 10V PWM dimming means that a PWM signal created by a switch or a control can be used to dim the driver using the dimming wires.

The dimmer I want to use is not on the compatibility list, does that mean it won’t work?

The dimmers on the list have been tested and are going to work with our Zurik® Universal Driver; however, this doesn’t mean that you can’t use a different dimmer. You can test your dimmer with our products if they work with one of the advertised protocols, but we cannot guarantee 100% compatibility.

What does the “Auto Circuit Protection” mean?

Auto Circuit protection is an automatic recovery breaker inside the transformer. This means that for safety, if the unit detects overheating, overloading or short circuits that affect the proper functioning of the system the internal breaker will trip cutting off power and will automatically trip back once the fault has been removed.

Can I install this driver outdoors?

This driver is IP66 rated, which means it’s protected against powerful jets of water and is therefore rated for general outdoor use, but you should always check with your local electrician as your specific area may require the use of an additional junction box or enclosure.

Need assistance with your project or purchase? Our design specialists are ready to help. Contact Us!

Zurik® EMLV Electronic Dimmable LED Driver Downloads

Zurik® Universal Dimmable LED Driver - Data Sheet

Zurik® Universal Dimmable LED Driver - Compatibility List

2*12.5A